Skip to content 
The pneumatic carton waste paper stripper is also called the hand-held waste paper stripper. It can remove waste paper edges for the cardboard or corrugated board after die cutting. This equipment is mainly designed for the printing plants which produces cosmetic packaging, pharmaceutical packaging, fruit packaging, fast food packaging and other commercial packaging.
Waste paper stripper operating principle
The sliding air valve and the hand-controlled air valve allow pressurized air to enter the deceleration motor from the handle’s tail joint. The air motor produces a consistent rotational distance. Sharp teeth on the toothed chain, which is driven by the air motor to run at high speed and remove the waste paper.
Pneumatic Carton Waste Paper Stripper Operation Steps
Connect the waste stripper with the air compressor. The working pressure of the air compressor should be above 0.6KPA. Please connect the Waste stripper to the 220V power supply.
2. Hold the clutch handle with your left hand and the motor handle with your right hand. Turn on the machine and work with both hands.
3. The chain of the machine will rotate at high speed after starting. Place the machine on the edge of the cardboard, and gently press the equipment on the edge of the sheets.
4. After stripping, the waste paper shall be swept away.
The characteristics of pneumatic waste stripper
(1) The pneumatic waste stripper has cost-effective price and suitable for plants which are producing big size corrugated cartons or plants which are producing small quantity products.
(2) Pneumatic waste stripper can replace manual stripping, resulting in less artifact tear and less damage to the products.
(3)Pneumatic waste stripper is very easy to operate, after simple training, the labors can operate smoothly.
(4)Compared with manual waste stripping, pneumatic waste stripper has higher working efficiency. It takes 2~3 hours for a worker to finishing manually stripping the waste for a pile of cardboard. With the help of pneumatic waste stripper, the process can be completed within 1 hour or so. The efficiency is improved by at least 2-3 times.
Article Summary
Pneumatic waste stripper, as an Auxiliary tool for the finishing process, is commonly used among printing firms around the world. Compared with Automatic Waste stripping Machine, Pneumatic waste stripper still has many limitations, but it is still cost-effective for some certain plants, especially for factory which mainly produces corrugated sheet. SINHOSUN can offer your esteemed company not only with good quality pneumatic waste stripper, but also provide you with better waste stripping solutions. If your factory wants to further improve the efficiency of waste stripping process, we may recommend our core product – automatic waste stripping machine.
If this article can help you to know more about pneumatic waste stripping tools, we would appreciate your sharing. If you have related post-press equipment needs or purchase needs of waste stripping machines, you can leave a message to us and our professional colleagues will serve you.
