In the previous article, we introduced the relevant knowledge of the pneumatic waste stripper.
Pneumatic waste stripper is generally used among the printing plants which with die cutting machines. This stripping equipment works with the tooth chain running at high speed through air motor, and uses the sharp teeth to hook out the waste paper at the edge of sheets.
But many people do not know how to make the pneumatic waste stripper more durable. This article will explain this point.
A. Select suitable chains for different sheets
The chains of the pneumatic waste stripper is an important part of the whole machine, and are also the wearing parts. We are offering a different kind of chains for our customers. With the rich experience in this industry, it is found that many customers have some problems in choosing the right chains for their production.
As shown in the image below, the chain of the general pneumatic waste cleaner has single teeth and double teeth:
When you need to remove the paper jam, we recommend the use of double-toothed chain, double-toothed chain will double the grasping frequency of the product, processing the paper jam will become more detailed.
When you need to remove corrugated cardboard, we recommend single-tooth chain, in the face of corrugated boxes, single-tooth chain can better enhance the grip, which is also the reason why a single-tooth chain can be easier to peel corrugated waste from the cardboard.
At present, the most common chain on the market is a single tooth, it can be used in the face of cardboard and corrugated paper, a wider range of applications. And there is an obvious advantage, the wear resistance of the single-tooth chain will be higher, single your single tooth chain teeth blunt, can also be used to polish the polishing machine to continue to use!
2. The material of the chain
The main problem of the pneumatic waste stripper is the wear and tear of the chains,so the material of chains is the key. Choose the chain with better hardness, which can also make the machine more durable.Titanium steel with high hardness, and after heat treatment, and then through wire cutting assembly into the required length of the chain.
B. Maintain the pneumatic waste stripper before and after the completion of the work
As a kind of pneumatic tools, the maintenance is basically the same as other pneumatic tools. The key is to add lubricating oil often.
Through our own testing and customer feedback, we found that the service life of pneumatic stripper which with continuously maintenance is more than twice as long as that of the color box pneumatic scrap cleaner which is often maintained.
How should the pneumatic waste stripping machine be maintained? We generally follow the next three points:
1. Timely Fill the Air Tool Lubricant at the air inlet while working, usually 2-3 drops of oil every 3 hours.
2. Apply lubrication on the chain, reduce abrasion, and improve the service life of the machine.
3. Periodically check the chain for excessive slack, if it is, should be adjusted immediately.
Summary
Hope you now have a better understanding of how to choose and use pneumatic waste stripping tools as a result of the above round of introductions. In order to increase the durability of your pneumatic tools and enable them to serve longer, maintenance is even more crucial than chain selection. Whether you need a pneumatic waste stripping tool or an automatic waste stripping machine, SINHOSUN will give you the most expert advice and service. If you want a better solution, please kindly share your situation with us.
